Yamaha F4D Скачать руководство пользователя | Manualshive

Страница: 43 / 68

background image

Maintenance

38

2.

Spray the outboard motor exterior with
“Yamaha Silicone Protectant” (Part No.
LUB-SILCNE-13-00).

CAUTION:

ECM01330

If equipped Electronic Fuel Injection: Do
not spray when the engine is running. Al-
so, do not spray near the silencer and ox-
ygen sensor cover or into the engine.
Otherwise the oxygen sensor for Elec-
tronic Fuel Injection system could be

damaged.

3.

Wax the cowling with a non-abrasive
wax such as “Yamaha Silicone Wax”
(Part No. ACC-11000-15-02).

EMU28450

Cleaning the outboard motor

After use, wash the exterior of the outboard
motor with fresh water. Flush the cooling
system with fresh water.

NOTE:

For cooling system flushing instructions, see

page 35.

EMU28460

Checking painted surface of motor

Check the motor for scratches, nicks, or flak-
ing paint. Areas with damaged paint are
more likely to corrode. If necessary, clean
and paint the areas. A touch-up paint is avail-
able from your Yamaha dealer.

EMU28483

Periodic maintenance

WARNING

EWM01070

Be sure to turn off the engine when you
perform maintenance unless otherwise
specified. If you or the owner is not famil-
iar with machine servicing, this work
should be done by your Yamaha dealer or

other qualified mechanic.

Maintenance, replacement, or repair of
the emission control devices and sys-
tems may be performed by any marine
engine repair establishment or individual.
All warranty repairs, however, including
those to the emission control system,
must be performed by an authorized
Yamaha marine dealership.

A service manual is available for purchase
through your Yamaha dealer for owners who
have the mechanical skills, tools, and other
equipment necessary to perform mainte-
nance not covered by this owner’s manual.

EMU28510

Replacement parts

If replacement parts are necessary, use only
genuine Yamaha parts or parts of the same
type and of equivalent strength and materi-
als. Any part of inferior quality may malfunc-
tion, and the resulting loss of control could
endanger the operator and passengers.
Yamaha genuine parts and accessories are
available from your Yamaha dealer.

ZMU02703

«
...
41
42
43
44
45
...
»

Содержание F4D





































































Отзывы:

Нет отзывов

Похожие инструкции для F4D

Бренд: Yanmar Страницы: 44

Бренд: Datavan Страницы: 15

Бренд: Xeltek Страницы: 19

Бренд: Biostar Страницы: 49

Бренд: Gigabyte Страницы: 8

Бренд: Advantech Страницы: 118

Spacewalker AK32

Бренд: Shuttle Страницы: 89

Бренд: IBASE Technology Страницы: 56

DLP LightCrafter Display 3310

Бренд: Texas Instruments Страницы: 16

Бренд: ASROCK Rack Страницы: 83

Бренд: ON Semiconductor Страницы: 5

Бренд: Gigabyte Страницы: 88

Бренд: ST Страницы: 11

Бренд: IEI Technology Страницы: 53

Бренд: M-tech Страницы: 2

Бренд: u-blox Страницы: 23

Бренд: DFI Страницы: 121

Бренд: DFI Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды