Components
23
and then check that it is operating prop-
erly. If the transmitter is not operating
properly, contact a Yamaha dealer.
Keep the remote control transmitter
away from high temperatures and do
not place it in direct sunlight.
Do not drop the remote control trans-
mitter, subject it to strong shocks, or
place any heavy items on it.
Use a soft, dry cloth to clean the remote
control transmitter. Do not use deter-
gent, alcohol, or other chemicals.
Do not attempt to disassemble the re-
mote control transmitter yourself. Oth-
erwise, the transmitter may not operate
properly. If the transmitter needs a new
battery, contact a Yamaha dealer.
If you have lost the remote control
transmitter, consult your Yamaha deal-
er. Keep the least 2 transmitters at all
the time. If you have lost both transmit-
ters, consult your Yamaha dealer.
TIP:
Since the receiver is programmed to rec-
ognize the internal code from this transmit-
ter only, the security system setting can
only be changed with this transmitter. If the
remote control transmitter does not oper-
ate properly, contact a Yamaha dealer.
Have your Yamaha dealer replace the
transmitter battery after 1 year, and every
2 years thereafter as a standard practice.
Refer to local hazardous waste regulations
when disposing of transmitter batteries.
The Yamaha Security System permits reg-
istration of up to 5 remote control transmit-
ters. It is recommended that you have at
least 2 transmitters at all times in case one
is lost or damaged. Consult your Yamaha
dealer for details.
EMU38603
Receiver
The receiver controls the ECM (Electronic
Control Module) to prevent the engine from
starting. Consult your Yamaha dealer for in-
stallation of the receiver.
EMU41612
Yamaha Security System lock and
unlock mode
The Yamaha Security System settings are
selected by pressing the lock or unlock but-
ton on the remote control transmitter briefly.
LOCK
When the lock button on the remote control
transmitter is pressed briefly, the beeper
sounds once. This indicates the lock mode is
selected and the engine cannot be started.
The lock mode is selected only when the
main switch is in the “
” (off) position.
UNLOCK
When the unlock button on the remote con-
trol transmitter is pressed briefly, the beeper
sounds twice. This indicates the unlock
mode is selected and the engine can be
started.
1. Lock button
2. Unlock button
1
2
ZMU06456
6CE-9-74-1E0.book 23 ページ 2014年12月4日 木曜日 午前9時30分
Содержание F225F
Страница 39: ...Components 32 1 Fuel filter 1 ZMU07518 6CE 9 74 1E0 book 32 ページ 2014年12月4日 木曜日 午前9時30分 ...
Страница 109: ...6CE 9 74 1E0 book 102 ページ 2014年12月4日 木曜日 午前9時30分 ...
Страница 110: ...Printed on recycled paper Printed in Japan November 2014 0 5 1 6CE 9 74 1E0 book 1 ページ 2014年12月4日 木曜日 午前9時30分 ...