![background image](http://html2.mh-extra.com/html/yamaha/f150a/f150a_owners-manual_3180433051.webp)
Operation
45
EMU27153
Engine
●
Check the engine and engine mounting.
●
Look for loose or damaged fasteners.
●
Check the propeller for damage.
●
Check for engine oil leaks.
EMU36492
Flushing device
Check that the flushing device’s garden hose
connector is securely screwed on to the fitting
on the bottom cowling.
NOTICE:
If the gar-
den hose connector is not properly con-
nected, cooling water can leak out and the
engine can overheat during operation.
[ECM01801]
EMU36941
Install cowling
1.
Be sure that all cowling lock levers are re-
leased.
2.
Be sure that the rubber seal is seated all
the way around the engine.
3.
Place the cowling on top of the seal.
4.
Check to be sure it fits properly in the rub-
ber seal.
5.
Move the levers to lock the cowling as
shown.
NOTICE:
If the top cowling is
not installed correctly, water spray un-
der the top cowling can damage the
engine, or the top cowling can blow off
at high speeds.
[ECM01991]
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
2. Lower level mark
3. Upper level mark
1. Fitting
2. Flushing device
ZMU06159
1
2
ZMU06131
ZMU06132
U63P2AE0.book Page 45 Monday, March 1, 2010 1:49 PM