Operation
44
EMU36483
Engine shut-off cord (lanyard)
Inspect the engine shut-off cord and clip for
damage, such as cuts, breaks, and wear.
EMU37052
Engine oil
1.
Put the outboard motor in an upright po-
sition (not tilted).
NOTICE:
If the motor
is not level, the oil level indicated on
the dipstick may not be accurate.
[ECM01790]
2.
Remove oil dipstick and wipe it clean.
3.
Insert the dipstick and remove it again.
Be sure to completely insert the dipstick
into the dipstick guide, otherwise the oil
level measurement will be incorrect.
4.
Check the oil level using the dipstick to be
sure the level falls between the upper lev-
el mark and lower level mark. Consult
your Yamaha dealer if the oil level is out
of specified level or if it appears milky or
dirty.
1. Cord
2. Clip
3. Engine shut-off switch
1. Cord
2. Clip
3. Engine shut-off switch
1. Cord
2. Clip
ZMU04565
1
2
3
ON
START
OFF
ON
START
OFF
1
ZMU04564
2
3
ON
START
OFF
ON
START
OFF
1
2
3
ZMU05818
3. Engine shut-off switch
1. Oil dipstick
1. Oil dipstick
ZMU06221
1
1
3
2
ZMU07056
U63P2AE0.book Page 44 Monday, March 1, 2010 1:49 PM