Operation
59
The signal transmission range of the re-
mote control transmitter varies depending
on the mounting position of the receiver. To
operate the Yamaha Security System cor-
rectly, use the transmitter as close as pos-
sible from the receiver.
If the Yamaha Security System does not
operate correctly, repeat the activating
procedure.
2.
Place the remote control lever in “ ”
(neutral).
TIP:
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
3.
Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.
4.
Turn the main switch to “
” (on).
N
ZMU04588
ZMU04628
ON
START
OFF
ON
START
OFF
ZMU05828
U6EK71E0.book Page 59 Monday, December 8, 2014 10:28 AM
