Yamaha F Diver 510N XJ6F Скачать руководство пользователя | Manualshive

Страница: 11 / 104

background image

SAFETY INFORMATION

1-4

1

tents, can create unstable han-
dling or a slow steering re-
sponse.

●

This vehicle is not designed to
pull a trailer or to be attached to
a sidecar.

Genuine Yamaha Accessories

Choosing accessories for your vehicle
is an important decision. Genuine
Yamaha accessories, which are avail-
able only from a Yamaha dealer, have
been designed, tested, and approved
by Yamaha for use on your vehicle.
Many companies with no connection to
Yamaha manufacture parts and acces-
sories or offer other modifications for
Yamaha vehicles. Yamaha is not in a
position to test the products that these
aftermarket companies produce.
Therefore, Yamaha can neither en-
dorse nor recommend the use of ac-
cessories not sold by Yamaha or
modifications not specifically recom-
mended by Yamaha, even if sold and
installed by a Yamaha dealer.

Aftermarket Parts, Accessories, and
Modifications

While you may find aftermarket prod-
ucts similar in design and quality to
genuine Yamaha accessories, recog-
nize that some aftermarket accessories
or modifications are not suitable be-
cause of potential safety hazards to you
or others. Installing aftermarket prod-
ucts or having other modifications per-
formed to your vehicle that change any
of the vehicle’s design or operation
characteristics can put you and others
at greater risk of serious injury or death.
You are responsible for injuries related
to changes in the vehicle.
Keep the following guidelines in mind,
as well as those provided under “Load-
ing” when mounting accessories.

●

Never install accessories or carry
cargo that would impair the perfor-
mance of your motorcycle. Care-
fully inspect the accessory before
using it to make sure that it does
not in any way reduce ground
clearance or cornering clearance,

limit suspension travel, steering
travel or control operation, or ob-
scure lights or reflectors.

• Accessories fitted to the handle-

bar or the front fork area can
create instability due to improper
weight distribution or aerody-
namic changes. If accessories
are added to the handlebar or
front fork area, they must be as
lightweight as possible and
should be kept to a minimum.

• Bulky or large accessories may

seriously affect the stability of
the motorcycle due to aerody-
namic effects. Wind may at-
tempt to lift the motorcycle, or
the motorcycle may become un-
stable in cross winds. These ac-
cessories may also cause
instability when passing or being
passed by large vehicles.

• Certain accessories can dis-

place the operator from his or
her normal riding position. This
improper position limits the free-
dom of movement of the opera-

U1CWE2E0.book Page 4 Monday, June 11, 2012 1:56 PM

«
...
9
10
11
12
13
...
»

Содержание F Diver 510N XJ6F









































































































Отзывы:

Нет отзывов

Похожие инструкции для F Diver 510N XJ6F

Бренд: kellermann Страницы: 2

Stelvio 1200 4V

Бренд: MOTO GUZZI Страницы: 135

Бренд: R&G Страницы: 14

Бренд: KTM Страницы: 25

Бренд: PUIG Страницы: 2

Бренд: Honda Страницы: 123

Бренд: DYNATEK Страницы: 4

Бренд: hepco & becker Страницы: 2

Бренд: Saddlemen Страницы: 6

Metric Cruiser Seats

Бренд: Saddlemen Страницы: 3

Бренд: Healtech Страницы: 2

BRAKE LIGHT PRO

Бренд: Healtech Страницы: 2

Бренд: cleanAIR Страницы: 146

Bullet 350 2019

Бренд: Royal Enfield Страницы: 68

Classic 500 2017

Бренд: Royal Enfield Страницы: 144

Бренд: KTM Страницы: 258

Бренд: KTM Страницы: 255

Бренд: GripOne Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды