manualshive.com logo in svg

Yamaha EXCITER SE, Руководство пользователя

Поделиться
Скачать
Yamaha EXCITER SE Скачать руководство пользователя страница 82

4

4-14

M

AINTENANCE

& C

ARE

CHOKE CABLE ADJUSTMENT

Pull the choke knob out until it stops.
Release the knob. The knob should not
move. If it moves back on its own, tight-
en the friction adjustment slightly. If the
knob is difficult to move, loosen the fric-
tion adjustment slightly.

REVERSE GATE MECHANISM
INSPECTION

1. Remove the engine stop switch lan-

yard and ignition key.

2. Put the throttle lever in the idle posi-

tion (otherwise the shift lever will not
move).

3. Push the shift lever to Forward from

the Neutral position while a second
person observes shift gate move-
ment from outside the boat. The
shift gate should lift completely to
the stops.

4. Pull the shift lever back from

Forward through Neutral to
Reverse. The observer shouldcheck

for proper movement of the shift
gate. The gate should drop down
over the nozzle to the stops.

If reverse gate does not operate
smoothly or correctly, ask your autho-
rized Yamaha Jet Boat dealer for ser-
vice.

FUSE REPLACEMENT

➀

Ignition coil holder

➂

Fuse (10A)

➁

Grommet                

➃

Fuse holder

The fuse is in the electrical box. To
replace the fuse, unscrew the cap and
pull out the fuse holder connected to
two red leads. Open the fuse holder
and replace the fuse.

Accessory Fuse

➀

Fuse (20A) 

➁

Accessory lead

The fuse is on the accessory battery
lead wire (red with black stripe). To
replace the fuse, open the fuse box
and replace the fuse.

➀

➁

Содержание EXCITER SE











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды