10
Mounting the unit on a wall
It can be installed as shown in the figure. Be sure to follow the instructions
on page 11 for installation.
Touch panel
Remote control sensor
CAUTION
• Please have a qualified contractor or dealer when mounting the unit
on a wall. Some skills and experience are required for safe installation.
• To prevent the unit from falling, attach it to a wall constructed of
drywall (plasterboard).
• Make sure you use screws (sold separately) that can support the
weight of the installation. Using clamps other than specified screws,
such as short screws, nails, and two-sided tape, may cause the unit to
fall.
• Fix the cables in place where they will not become loose. If your foot
or hand accidentally gets caught on a loose cable, the unit may fall.
• Do not lean on the unit or apply excessive force to the top of the unit.
Doing so may cause the unit to fall.
• Check that the unit is securely fixed after the installation. Yamaha will
bear no responsibility for any accidents caused by improper
installations.
