59
8 Music Disk Recorder
6.
After numbers appear on the LED
display of the M.D.R., begin playing.
Once the setup operation in step #5 is complete, a
number will appear on the LED display indicating that you
can begin recording your performance. The number also
indicates the amount of memory left on the disk.
If you make a mistake during recording:
1.
Press the PLAY button while the M.D.R. is still
running.
This stops the recording and returns you to the starting
point of the song.
The letters "rE" (retry) appear on the left side of the LED
display and the PLAY and CUSTOM PLAY LEDs start
flashing, indicating that you can re-record the song.
2.
Press PLAY again to begin re-recording the song.
Re-recording starts from the beginning of the song and
replaces the previously recorded performance with the
newly recorded performance.
7.
When you finish playing, press the
STOP button.
After the small bars flash to draw a square on the LED
display to indicate the processing for stop, both the
RECORD and PLAY lamps go out, and recording is
stopped.
8.
To hear your newly recorded
performance, press the PLAY button.
Playback will begin after a couple of seconds. For more
information on playback and other playback-related
functions, see page 65.
UPPER
LOWER
PEDAL
CONTROL
UPPER
LOWER
PEDAL CONTROL
SHIFT
SONG
REPEAT
FROM
SONG DEL.
TO
PAUSE
RECORD
CUSTOM PLAY
FORMAT
STOP
PLAY
SONG SELECT
RECORD
PLAY
SONG COPY
TEMPO
MUSIC DISK RECORDER
622
UPPER
LOWER
PEDAL
CONTROL
UPPER
LOWER
PEDAL CONTROL
SHIFT
SONG
REPEAT
FROM
SONG DEL.
TO
PAUSE
RECORD
CUSTOM PLAY
FORMAT
STOP
PLAY
SONG SELECT
RECORD
PLAY
SONG COPY
TEMPO
MUSIC DISK RECORDER
rE01
The short time it takes to set up for recording is
recorded as well, causing a short pause before
playback of the song.
UPPER
LOWER
PEDAL
CONTROL
UPPER
LOWER
PEDAL CONTROL
SHIFT
SONG
REPEAT
FROM
SONG DEL.
TO
PAUSE
RECORD
CUSTOM PLAY
FORMAT
STOP
PLAY
SONG SELECT
RECORD
PLAY
SONG COPY
TEMPO
MUSIC DISK RECORDER
01
Be sure to remove the floppy disk from the
disk drive after the STOP lamp lights up.
When the available memory reaches "008" or
less, the numbers begin flashing to warn you.
If this happens, stop recording before the display
reaches "000."
Never attempt to press the eject button or
turn the power off during recording, reading
and playing back. Doing so can damage
the disk and possibly the disk drive. Be sure to
remove the floppy disk from the disk drive before
turning off the power.