24
3 Voice Controls and Effects
3 Voice Controls and Effects
The Electone is equipped with two general kinds of functions that can be used to change the
sound of the voices: Voice Controls and Effects.
These are used to change various aspects of the voices, such as the volume or octave (footage)
settings, or enhance the sound of the voices, such as with Reverb or Tremolo. They are divided
into two groups: 1) The controls/effects selected on the Voice Condition pages. 2) The effects set
by the panel buttons.
Each voice has been given certain factory-preset settings to best enhance its sound. However,
you can also change the settings to suit your preferences by using the controls described in this
section.
1. Selecting from the Voice Condition Pages
To select the Voice Condition pages for changing the settings:
Choose a voice on the panel, then press that voice's panel button
twice; If the voice you want to select is already displayed on the LCD
display, press once.
For the Lead Voice example shown below, press the VIOLIN button in the
LEAD VOICE section twice.
Page 1 of the Voice Condition pages is displayed on the LCD display. Each
of the Voice Conditions has page 1 through 4.
Voice Condition – Page 1
Lead Voice
!
TOUCH (TOUCH TONE)
See page 24.
"
VOL. (VOLUME)
Fine adjustment of the voice volume. See page 20.
<LEAD> ¡1
TOUCH=4 VOL.=24
PAGE
!
"
VIOLIN
FLUTE
MAX
MIN
OBOE
TRUM-
PET
TO
LOWER
LEAD VOICE
1
The Pedal Condition display
has only two pages: The
Pedal voices do not have the Vibrato
function.