28
Voice Sections
2
3.
Set the volume for the Upper Keyboard Voice 2.
Pressing the same Data Control button corresponding to the selected
voice calls up the Voice Condition display. Use the Page buttons to
select page 2, which contains Volume setting.
INIT.T: 8 ¨2⁄
FEET:PRESET
DATA CONTROL
DATA CONTROL
PAGE
Use the top left side Data Control button pair to change the level of the
desired voice.
VOL.:24 PAN:C ¨2¤
REVERB:24
DATA CONTROL
DATA CONTROL
You can select the voices of Lower Keyboard Voice 2 and Pedal Voice
2 in the same manner.
NOTE:
Also, you can change the volume of the
Upper Keyboard Voice 2 voices by
pressing the Upper Keyboard Voice
volume buttons on the panel while
holding VOICE DISPLAY button.
NOTE:
The panel volume lamp position will not
be affected even if you change the
volume of Upper Keyboard Voice 2.
The volume buttons on the panel are
exclusive for the panel voice groups.