5
Getting Started
B
A
30°
30°
Remote control preparations
»
A
Battery installation
Use of batteries
³
Align the poles (
i
and
j
) properly when inserting the batteries.
³
Do not mix old and new batteries or different types of batteries.
³
Do not recharge ordinary dry cell batteries.
³
Do not heat or disassemble the batteries. Do not allow them to con-
tact flame or water.
³
Remove the batteries if the unit is not to be used for a long time.
³
Do not keep together with metallic objects such as necklaces.
³
Do not use rechargeable type batteries.
³
Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
»
B
Correct method of use
Operation notes
³
Do not place obstacles between the remote control signal sensor
and remote control unit.
³
Do not expose the remote control signal sensor to direct sunlight or
to the bright light of a fluorescent light.
³
Take care to keep the remote control signal sensor and end of the
remote control unit free from dust.
³
If this system is installed in a rack with glass doors, the glass doors’
thickness or color might make it necessary to use the remote con-
trol a shorter distance from the system.
To prevent damage
³
Never place heavy items on top of the unit.
³
Do not disassemble or reconstruct the unit.
³
Do not spill water or other liquids into the unit.
R6/LR6, AA, UM-3
Remote control signal sensor
Transmission
window
About 23 feet
(7 meters)
in front of the
signal sensor
