DVD-S520/DV-S5450
DVD-S520/DV-S5450
9
■
SERVICE HINTS
Diagnostic software
In chapter “Diagnostic software”, some tests are refering
to the SCART functionality.
These tests are for sets with RGB-output.
For sets without RGB-output, no SCART connector is
mounted.
In these sets, the SCART tests will automatically be
skipped.
■
SERVICE POSITION
See figure 1 for the service position
1. Remove the cables from the cable tie housing.
2. Remove 4 screws that mount the DVD module to the
bottom frame.
3. Move the DVD module backward slightly and flip the
module over, so that the component side of the board
faces upwards, and the module is in the service
position.
Fig. 1
