Yamaha DTXPRESS II, Руководство пользователя

Страница: 29 / 206

29
Utility Mode
2-3. Volume Mode
Sets the ACCOMP. VOL knob and CLICK VOL knob on the front
panel.
2. SYSTEM Group
This sub-mode contains settings that relate to the overall
DTXPRESS II system. The group is divided into the following 6
pages.
2-1. Learn Mode ..................................................... 29
2-2. Trigger Bypass ................................................. 29
2-3. Volume Mode .................................................. 29
2-4. Jump to Recent Page ...................................... 29
2-5. Hi-Hat Offset .................................................... 30
2-6. Factory Set ...................................................... 30
2-1. Learn Mode
This function allows selection of the pad (trigger input) you want
to edit by hitting the pad when you are editing in the Trigger Setup
Edit mode or Drum Kit Edit mode. Also, MIDI key on input from
the MIDI IN/TO HOST jack can be used to appoint the MIDI note
number in the Utility mode’s User Map Setting.
q
LearnMode
allwys
:Always appoints according to pad/key on input.
shift
: Hitting a pad or key on input while holding the [SHIFT]
button selects the pad or note.
none
: Can’t appoint according to pad/key on input.
2-2. Trigger Bypass
This function prohibits reception of pad signals from pads (the hi-
hat controller too) connected to the DTXPRESS II. You will not
be able to produce voices or transmit MIDI data. The sequencer
and tone generator will function normally.
Use this function when you are setting your drum kit with
trigger pickup devices, or when you do not want to acci-
dentally make a sound during song playback.
UT SYSTEM
LearnMode=allwys
q
q
Trig Bypass
off
: Bypasses the trigger (does not receive).
on
: The trigger functions normally (receives trigger).
UT SYSTEM
Trig Bypass= i off
q
q
VolMode (Volume Mode)
• practice : When set to the practice mode.
[ACCOMP. VOL]
Using the [ACCOMP. VOL] knob as is will adjust the volume of
the song accompaniment.
Holding the [SHIFT] button while turning the knob will adjust the
snare drum volume.
[CLICK VOL]
Using the [CLICK VOL] knob as is will adjust the volume of the
metronome click.
Holding the [SHIFT] button while turning the knob will adjust the
bass drum volume.
•
live:
When set to the Live mode.
[ACCOMP. VOL]
Using the [ACCOMP. VOL] knob as is will adjust the snare drum
volume.
Holding the [SHIFT] button while turning the knob will adjust the
cymbal volume.
[CLICK VOL]
Using the CLICK VOL knob as is will adjust the bass drum vol-
ume.
Holding the [SHIFT] button while turning the knob will adjust the
volume of the drum’s other drum instruments.
2-4. Jump to Recent Page
This function lets you display the page last selected in the previ-
ous edit of the Trigger Setup Edit mode and Drum Kit Edit mode.
UT SYSTEM
VolMode=practice q
q
JumpRecentPg (Jump to Recent Page)
on
: The display page last selected in the previous edit will ap-
pear when you enter the Trigger Setup Edit, Drum Kit Edit,
Utility and Song Edit modes.
off
: The main page of each mode will be displayed.
UT SYSTEM
JumpRecentPg=off q