Yamaha DSP-Z11, Руководство пользователя

Страница: 79 / 150

Graphical user interface (GUI) menu
79
En
Ad
v
a
nce
d
Op
eratio
n
Liveness
Sur. Liveness
SB. Liveness Liveness. Surround and surround back liveness. Adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the
early reflections decay. The early reflections of a sound source decay much faster in a room with acoustically absorbent wall surfaces than
in one which has highly reflective surfaces. A room with acoustically absorbent surfaces is referred to as “dead”, while a room with highly
reflective surfaces is referred to as “live”. This parameter lets you adjust the early reflection decay rate and thus the “liveness” of the room.
Control range: 0 to 10
Rev. Time Reverberation time. Adjusts the amount of time taken for the dense, subsequent reverberation sound to decay by 60 dB at 1 kHz. This
changes the apparent size of the acoustic environment over an extremely wide range. Set a longer reverberation time to get more sustaining
reverberation sound, and set a shorter time to get articulate sound.
Control range: 1.0 to 5.0 s
Rev. Delay Reverberation delay. Adjusts the time difference between the beginning of the direct sound and the beginning of the reverberation sound.
The larger the value, the later the reverberation sound begins. A later reverberation sound makes you feel as if you are in a larger acoustic
environment.
Control range: 0 to 250 ms
Sound field
parameter
Features
Source sound
Le
v
el
L
eve
l
Le
v
el
Dead
Live
Time Time Time
Small reflected
sound Large reflected
sound
Small value = 0 Large value = 10
Reverberation Reverberation Source sound
Rev. Time
Rev. Time Rev. Time
Sound source
Short
reverberation
Long
reverberation
Small value = 1.0 s Large value = 5.0 s
Early reflections
60 dB 60 dB 60 dB
(dB)
L
eve
l
Source sound
Reverberation
Rev. Time Rev. Delay
Time
60 dB