Yamaha DPX-1300 страница 63 Скачать руководство пользователя | Manualshive

Страница: 63 / 70

background image

59

Reference

11

English

◆

Replacing the lamp

The lamp used as a light source in the DPX-1300 is a consumable item which will gradually lose its brightness during the course of use. It is
advisable to replace the lamp when running time has exceeded 2000 hours.
You can check the lamp running time in the [Lamp Running Time] in the [Initial] menu group of the Menu screen. The LAMP warning
indicator will blink when running time exceeds 2000 hours.
There will also be a message displayed on the screen. In this case, follow the instructions below to replace the lamp cartridge. For details on
replacement of lamp cartridges, consult the store where you purchased the DPX-1300.

Warning

•

Be sure to use the replacement lamp cartridge PJL-427. Other lamp cartridges are not suitable for use in the DPX-1300.

•

If replacing the lamp of the projector that has been installed to the ceiling, you should remove the projector from the ceiling before
replacing the lamp.

•

Before starting to replace the lamp cartridge, turn off the power, disconnect the power cable after the fan has completely stopped,
and wait at least one hour for the lamp to cool down.

•

Do not remove any other screws than those specified in the following steps.

•

The gases inside the lamp contain mercury vapor. Be careful the lamp may break if it gets old or overtasked. The life of a lamp
differs depending on operation environments.

•

This product contains a high intensity lamp that contains a small amount of mercury. Disposal of this material may be regulated
due to environmental considerations. For disposal information in the United States, refer to the Electronic Industries Alliance
website: www.eiae.org

1. Loosen the lamp cover screws.

2. Remove the lamp cover.

3. Loosen the screws of the lamp cartridge.

4. Grip the handle and pull the lamp cartridge to remove it.

5. Insert the new lamp cartridge by reversing the above steps, and tighten

the screws to fix it into place.

6. Replace the lamp cover and secure it with the screws.

The lamp will not turn on if the cover is not securely fastened. Take care
to attach it firmly in place.

7. Connect the unit to the power outlet, turn the unit on, and reset [Lamp

Running Time] on the [Initial] group in the menu. (

☞

page 45)

Lamp cover screws

Maintenance

16_DPX-1300_E.p65

12/7/05, 4:43 PM

59

«
...
61
62
63
64
65
...
»

Содержание DPX-1300







































































Отзывы:

Нет отзывов

Похожие инструкции для DPX-1300

Бренд: Eaton Страницы: 12

Бренд: Leonics Страницы: 21

Бренд: BOXLIGHT Страницы: 43

Neomounts BEAMER-C80WHITE

Бренд: NewStar Страницы: 8

Бренд: Barco Страницы: 33

BEAMER 45BHM2550

Бренд: Salora Страницы: 14

Бренд: Zenith Страницы: 52

Бренд: Hitachi Страницы: 5

Бренд: Navitar Страницы: 1

Бренд: Philips Страницы: 2

LC7181 - Garbo Matchline WVGA LCD Projector

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

LC4746 cClear Air Brilliance

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

NeoPix Prime NPX540/INT

Бренд: Philips Страницы: 22

NeoPix Easy NPX440

Бренд: Philips Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды