![background image](http://html.mh-extra.com/html/yamaha/dme4io-es/dme4io-es_service-manual_896219068.webp)
68
DME4io-ES/DME8i-ES/DME8o-ES
Note
When the test is completed, switch positions will be set to the factory default.
Troubleshooting
Check the signals coming through the CN350 of the DSP circuit board in case of NG.
Or some dip switch may be defective.
3-15. AD Test (NO. 19)
Contents:
PHANTOM/GAIN are changed and checks if they are set correctly.
Preparations:
• Install a card such as MY16AE that can send and receive AES/EBU on the 01V96.
• When inspecting the 48 kHz AD, set up I/O Patch of the NAI48-ES as shown in the
fi
gure below
through the AVS-ES Monitor on the PC. Set up the I/O Patch in the same way when inspecting the 48
kHz DA.
Mixer
01V96, etc.
DME Satellite
NAI4
8
-ES
PC
:
@
;
.
=
AES/EBU
CAUTION:
Connect as shown in the figure above for AD test or DA test.
[Names of connectors to be used]
:
EtherSound IN connector
@
NETWORK connector
.
EtherSound OUT connector
;
EtherSound IN connector
=
INPUT connector
Switching Hub
• When inspecting the 96 kHz AD, set up the I/O Patch of the NAI48-ES as shown in the
fi
gure below
through the AVS-ES Monitor on the PC. Set up the I/O Patch in the same way when inspecting the 96
kHz DA.
Содержание DME4io-ES
Страница 39: ...39 DME4io ES DME8i ES DME8o ES Pattern side パターン側 DSP Circuit Board DSP 2NA WG30160 1 ...
Страница 41: ...41 DME4io ES DME8i ES DME8o ES Pattern side パターン側 AD Circuit Board DME4io ES DME8i ES AD 2NA WG30380 1 ...
Страница 43: ...43 DME4io ES DME8i ES DME8o ES DA Circuit Board DME4io ES DME8o ES Pattern side パターン側 AD 2NA WG30390 1 ...