manualshive.com logo in svg

Yamaha Diversion XJ600N, Руководство пользователя, Страница: 63 / 101

Поделиться
Скачать
Yamaha Diversion XJ600N Скачать руководство пользователя страница 63

L

6-15

PERIODIC MAINTENANCE AND MINOR REPAIR

/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-6.frame

EAU00683

Operating the motorcycle with ex-

cessively worn tires decrease riding

stability and can lead to loss of con-

trol. Have excessively worn tires re-

placed by a Yamaha dealer

immediately. Brakes, tires, and re-

lated wheel parts replacement

should be left to a Yamaha Service

Technician.

EAU00687

Wheels

To ensure maximum performance,

long service, and safe operation, note

the following:

l

Always inspect the wheels before

a ride. Check for cracks, bends, or

warpage of the wheels. If any ab-

normal condition exists in a wheel,

consult a Yamaha dealer. Do not

attempt even small repairs to the

wheel. If a wheel is deformed or

cracked, it must be replaced.

l

Tires and wheels should be bal-

anced whenever either one is

changed or replaced. Failure to

have a wheel balanced can result

in poor performance, adverse han-

dling characteristics, and short-

ened tire life.

l

Ride at moderate speeds after

changing a tire since the tire sur-

face must first be broken in for it to

develop its optimal characteristics.

1. Locknut

2. Adjusting bolt

c. Free play

EAU00694

Clutch lever free play 

adjustment

The clutch lever free play should be ad-

justed to 2 ~ 3 mm.

1. Loosen the locknut at the clutch le-

ver.

2. Turn the adjusting bolt at the

clutch lever in direction 

a

 to in-

crease free play or in direction 

b

to decrease free play.

3. Tighten the locknut at the clutch

lever.

Содержание Diversion XJ600N






































































































Отзывы:

Нет отзывов