Yamaha Diversion XJ600N Скачать руководство пользователя страница 31

Страница: 31 / 101

3-13

INSTRUMENT AND CONTROL FUNCTIONS

/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-3.frame

1. Arrow mark positioned over ÒONÓ

EAU00207

Fuel cock

The fuel cock supplies fuel from the

tank to the carburetors while also filter-

ing it.

The fuel cock has three positions,

which should be set as illustrated.

With the fuel cock in this position, fuel

flows to the carburetors when the en-

gine is running. Set the fuel cock to this

position when starting the engine and

for riding.

1. Arrow mark positioned over ÒRESÓ

RES

This stands for ÒreserveÓ. If you are

running out of fuel while riding with the

fuel cock in the ÒONÓ position, quickly

turn the lever to this position. Other-

wise the engine may die and will have

to be primed (see ÒPRIÓ below). After

turning the lever to ÒRESÓ, fill the tank

at the first opportunity and be sure to

set the fuel cock back to ÒONÓ!

1. Arrow mark positioned over ÒPRIÓ

PRI

This stands for ÒprimeÓ. If the engine

has been allowed to run out of fuel, turn

the lever to the ÒPRIÓ position to send

fuel directly to the carburetors. This will

make starting easier. However, be sure

to turn the lever to the ÒONÓ position (or

ÒRESÓ if you have not refuelled yet) af-

ter the engine has started.

Содержание Diversion XJ600N






































































































Результаты поиска

Содержание Diversion XJ600N

Отзывы:

Похожие инструкции для Diversion XJ600N

Бренды по названию

Популярные бренды

Yamaha Diversion XJ600N, Руководство пользователя

Результаты поиска

Содержание Diversion XJ600N

Отзывы:

Похожие инструкции для Diversion XJ600N

Бренды по названию

Популярные бренды