Yamaha disklavier Mark III Series Скачать руководство пользователя

Страница: 25 / 50

The table on the next page lists the default settings for the items that can be reset.

If you selected Setup, Memory Disk [X] + Setup or Memory Disk [X], press [+/YES] when a display
similar to the following appears.

If you selected Factory init. setting, press [ENTER] when the following display appears, then press
[+/YES].

Forced Reset

When the message “UNFORMATTED MEMORY DISK” appears, this indicates that all Memory
Disks are damaged.

In the Reset display, press [ENTER].

The following display appears.

Reset the Memory Disk as described above.

Notes: • If you accidentally turn off the Control Unit while data is being stored to a Memory Disk, one or

all Memory Disks may be damaged. They can only be recovered by returning them to initial fac-
tory settings.

• Be sure to keep a backup of important data.
• You cannot back up write-protected songs such as PianoSoft and PianoSoft.Plus songs onto floppy

disks.

Содержание disklavier Mark III Series



















































Результаты поиска

Содержание disklavier Mark III Series

Отзывы:

Похожие инструкции для disklavier Mark III Series

Бренды по названию

Популярные бренды

Yamaha disklavier Mark III Series, Руководство по обслуживанию

Результаты поиска

Содержание disklavier Mark III Series

Отзывы:

Похожие инструкции для disklavier Mark III Series

Бренды по названию

Популярные бренды