8-2. Updating the Tablet Controller (for North America)
Updating the Tablet Controller
1) Confirm that the Disklavier is turned on, and then press
(Power button) on the Tablet Controller.
2) Press
(P button) on the Tablet Controller.
The following configuration bar appears at the top of the touch screen.
3) Tap on
4) Tap on
Ex.:
5) Tap on
.
Update of the Tablet Controller starts, and the
message [Updating the Interface program...]
appears.
After 10 seconds or more, the following message
appears.
6) Tap on
.
The Tablet Controller automatically restarts.
Note: If the wireless LAN is outside the
specified communication range or there is no
update file, the following message appears.
In such a case, tap on
, and then try
the update procedure again close to the Disklavier.
Note: In the case where the update file was
found, but the firmware was not updated
successfully for some reason, the following
message appears.
If you want to try again, tap on
.
If the firmware cannot be updated even after
several tries, tap on
, exit Interface
Updater, and try Interface Updater once again
from the beginning.
MHB23 MKIV/PRO DIOV1.05, SCV.1.01 PAGE.26
