36
Starting Playback from
a Specified Point
(Search)
Playback can be started from a specified point in a
song. Instead of using fast forward or preview,
you can use this function to go directly to a
desired point within a song.
If the current song uses the minutes and seconds
time format, you specify the point in minutes and
seconds. If it uses the measures and beats time
format, you specify the point in measures and
beats.
Once a time value has been entered, it is saved
until the disk is ejected or the Disklavier
GranTouch is turned off. If you want to search for
the same point again, just press the search button
again.
1
Press [SEARCH].
The time counter on the display flashes.
2
Enter the time that you want to
search for.
For example, to search for 2:56, first press
[2], then [5], then [6].
If the time value is less than 10, that is,
between 00:01 and 09:59, remember to
press [0] first to set the first digit to zero.
If you enter a value higher than the entire
song time, the search goes to the end of the
song.
3
Press [SEARCH] again to begin the
search.
If the Disklavier GranTouch was already
playing when you pressed [SEARCH],
playback will continue from the new point
when the search is complete. If the
Disklavier GranTouch was not playing,
Pause mode is engaged when the search is
complete.
To search for a new point, repeat step 2.
Remote Control
SEARCH
Remote Control
SEARCH
Flashes
Remote Control
SEARCH
2
1
3
4
5
6
7
8
9
0