SPECIFICATIONS
DG80-112
3
Digital Section
Complete Digital Signal Processing
Internal 8 Channel Preset
Digital Reverb (SPRING, HALL, PLATE)
Digital Tape Echo
Speaker Simulator (LINE OUT)
Analog Section
80 W (8
Ω
) Solid State Power Amp
30 cm Speaker (Celestion G12H100) x 1
MIDI Function
Receive : Program change, Control Change (No. 7, 91, 94), Bulk In
Transmit : Bulk Out, Merge Out
Controller/Switch
Front Panel : TRIM, OUTPUT, GAIN, MASTER, TREBLE, HIGH
MID, LOW MID, BASS (TIME), PRESENCE (FEED
BACK), REVERB (LEVEL)
Rear Panel : LINE OUT volume, EFFECT BLEND
Switch :
AMP SELECT (LEAD1, LEAD2, DRIVE1, DRIVE2,
CRUNCH1, CRUNCH2, CLEAN1, CLEAN2),
REVERB, MODE,
,
, STORE, RECALL
Display
AMP SELECT display LED x 8
MODE display LED x 3
REVERB type display x 3
7 segment LED x 2 digits
Indicator
Trim Level Display LED (Green)
Trim Clip Display LED (Red)
Connection Jacks
INPUT HIGH/LOW: Standard Phone Mono Jack
SPEAKER x2: Standard Phone Mono Jack
EFFECT SEND/RETURN: Standard Phone Mono Jack
LINE OUT: Cannon Jack
MIDI IN, MIDI OUT: 5 pin DIN
A/D Converter
20 bit
D/A Converter
20 bit
Sampling Frequency
48 kHz
Memory Number
128
Input Level/Impedance
INPUT HIGH: -30 dBm (THRU)/1 M
Ω
INPUT LOW: -20 dBm (THRU)/1 M
Ω
EFFECT RETURN: 0 dBm/120 k
Ω
Output Level/Impedance
SPEAKER: 80 W RMS/8
Ω
, 100 W RMS/4
Ω
LINE OUT: +4 dBm/600
Ω
EFFECT SEND: 0 dBm/2.2 k
Ω
Power Requirements
U.S. and Canadian models : 120 V, 60 Hz
General model : 230 V, 50 Hz
Power Consumption
100 W
Dimensions (W x H x D)
542 x 510 x 284 mm (21.3” x 20.1” x 11.2”)
Weight
25.0 kg (55 lbs 2 oz)
