manualshive.com logo in svg

Yamaha D5000, Руководство по эксплуатации

Поделиться
Скачать
Yamaha D5000 Скачать руководство пользователя страница 10

8 - Program Select Mode

D5000

Press the 

[ > ]

 "

RECALL

" CURSOR key.

If you have not made any changes to the previous settings, it will be replaced with the new 
program.

If you made a mistake selecting the new program or you decide you do not want to replace the 
current program, you can cancel the RECALL operation by pressing any key except the 

[ > ]

 

"

RECALL

" CURSOR key.

Storing a program

Storing a program overwrites the data that was previously stored under that program number. If 
you decide that you do not want to replace the program or that you made a mistake selecting the 
program number, you can cancel the STORE operation by pressing any key other than the 

[ < ]

 

"

STORE

" CURSOR key.

If you have made changes to the previous settings without storing them, 
the unit will additionally display the message "

Are you sure?

" on the 

LCD. Press the 

[ > ]

 "

RECALL

" CURSOR key again to complete your 

selection. The previous program will be replaced with the new program.

Press the 

[ PROGRAM ]

 key to enter Program Select Mode. The LED on the 

key will light and the LCD will display the title of the current program.

Press the 

[ < ]

 "

STORE

" CURSOR key. The message "

[STORE]

" will be 

displayed on the LCD along with a message showing the "

From:

" and 

"

To:

" program numbers.

NOTE

If the SOFTWARE PROTECT parameter of Utility Mode is not set to OFF, the LCD will temporarily 
display the message "

Protected !

" when you attempt to store a program.

Rotate the DATA ENTRY encoder or press the 

[ ^ ]

 and 

[ % ]

 CURSOR keys 

to select the program number that you want for use to storing your 
settings.

Press the 

[ < ]

 "

STORE

" CURSOR key again to confirm that this is what you 

want to do. The message "

Complete !

" will briefly appear on the LCD.

Содержание D5000











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды