Basic Oper
ation
Basic Displays (Main Display and File Selection Display)
CVP-309/307 Owner’s Manual
68
3
Press the [2
π
π
π
π†
†
†
†
]–[6
π
π
π
π†
†
†
†
] and [7
π
π
π
π
] buttons, corresponding to the
character you wish to enter.
• Deleting characters
Move the cursor to the character you wish to delete by using the [DATA
ENTRY] dial, and press the [7
†
] (DELETE) button. To delete all charac-
ters on the line at once, press and hold the [7
†
] (DELETE) button.
• Actual entry of characters
Move the cursor or press another letter-input button.
• Canceling the character-entering operation
Press the [8
†
] (CANCEL) button.
• Entering special character marks (umlaut, accent, Japanese “ ”
and “ ”)
Select a character to which a character mark is to be added and press
the [6
†
] button before actual entry of the character.
• Entering marks
1
After actually entering a character by moving the cursor, press the
[6
†
] button to call up the mark list.
2
Use the [DATA ENTRY] dial to move the cursor to the desired mark,
then press the [8
π
] (OK) button.
• Entering numbers
First, select one of the following: “A B C” (full-size alphabet), “ABC”
”CASE“ (half-size capital alphabet) and “case” (half-size lowercase
alphabet). Then, press and hold down the appropriate button, [2
π†
]–
[5
π†
], [6
π
] and [7
π
] button, for a while, or press it repeatedly until
the desired number is selected.
• Converting into Kanji (Japanese language)
When the input “hiragana” characters are shown in reverse display
(highlighted), press the [ENTER] button one or several times to convert
the characters into the appropriate kanji. To actually enter the change,
press the [8
π
] (OK) button or enter the next character.
When the input “hiragana” characters are shown in reverse dis-
play (highlighted):
• Re-converting the characters into other kanji
Press the [ENTER] button.
• Changing the reversed area
Use the [DATA ENTRY] dial.
• Changing the converted kanji back to “hiragana”
Press the [7
†
] (DELETE) button.
• Clearing the reversed area at once
Press the [8
†
] (CANCEL) button.
• Entering the “hiragana” itself (without converting it)
Press the [8
π
] (OK) button.
4
Press the [8
π
π
π
π
] (OK) button to actually enter the new name and
return to the previous display.
The following half-size marks
cannot be entered for a file/
folder name.
¥ \ / : * ? " < > |
Several different characters are assigned to
each button, and the characters change each
time you press the button.
In the case of characters which
are not accompanied by special
character marks (with the excep-
tion of kanakan and half-size
katakana), you can call up the
mark list by pressing the [6
†
]
button after selecting a charac-
ter (before actual entry of a char-
acter).
