Quic
k Guide
CVP-309/307 Owner’s Manual
53
Singing with the Lyrics Display
Try singing while playing back a Song containing lyric data
Sing while following along with the lyrics on the display. The color of the lyrics changes as the Song plays.
n
•
When the lyrics are unreadable
You may need to change the Lyrics Language setting to “International” or “Japanese” in the Song Setting display ([FUNCTION]
→
[B] SONG SETTING), if the lyrics shown are garbled or unreadable. This setting can be memorized as part of the Song data
(page 156).
•
Changing the Lyrics Background Picture
You can change the background picture of the Lyrics display. Press the [7
π†
]/[8
π†
] (BACKGROUND) button in the Lyrics dis-
play to call up the Lyrics picture selection display for the available picture files and select the desired one. Press the [EXIT] button
to return to the previous display.
The lyrics background picture can be saved to the Song (page 156).
•
Changing the lyrics
You can change the lyrics as desired (page 160).
Convenient Functions for Karaoke
Transpose
You can use this to adjust the key of the Song if it is too high or low.
• Transposing the Song key up................ Press the TRANSPOSE [+] button.
• Transposing the Song key down ........... Press the TRANSPOSE [–] button.
• Resetting the transposition ................... Press the TRANSPOSE [+][–] buttons simultaneously.
Adjusting the tempo
➤
page 30
Transpose
➤
See below.
Applying Effects to Your Voice
➤
page 54
Adding Harmony Vocals to Your Voice
➤
page 54
Practicing Singing with Proper Pitch (Vocal CueTIME)
➤
page 135
1
Select a Song (page 34).
2
Press the [KARAOKE] button to display the lyrics.
3
Press the SONG [PLAY/PAUSE] button to start playback.
4
Press the SONG [STOP] button to stop playback.
VIDEO OUT
AUX IN
L L+R
R
Displaying the lyrics on an external TV monitor
The lyrics indicated on the display can also be output via the VIDEO OUT terminal.
1
Use an appropriate video cable to connect the [VIDEO OUT] connector
of the CVP to the Video input connector on the TV monitor.
2
Set the external television/video monitor signal (NTSC or PAL) used by
your video equipment, if necessary.
1
Call up the operation display.
[FUNCTION]
→
[G] VIDEO OUT
2
Press the [1
π†
] button to select the external television/video moni-
tor signal.