5
Tools
You will need the following tools at hand when installing the CRW8424S drive.
Phillips Screwdriver
You will need to use this when removing the cover of your computer and when
mounting the drive. You may also need to temporarily remove the sound card to
gain access to the CD audio connectors. In which case a small screw retaining
the sound card’s face plate has to be removed.
n
Make sure your screwdriver’s head is the correct size for the screws you need to remove.
Long-Nosed Pliers
You will need these to insert or remove the plastic shunts when setting the
jumper switches at the back of the CRW8424S drive.
System Configuration
8424S_e.qx 10/27/99 9:55 PM Page 12
