Yamaha CobraNet MY16-C, Руководство пользователя

Страница: 11 / 21

10
MY16-C Owner’s Manual
ENGLISH
■
DIP Switches
The DIP switches on the MY16-C circuit board can be used to set audio resolution, latency, the
clock synchronization mode, and clock frequency. All dip switches are OFF when the MY16-C is
initially shipped.
n
The RESERVED 1 and RESERVED 2 switches are reserved for functions to be
implemented in the future. Leave both of these switches OFF.
■
Audio Bits (BIT)
DIP switch 1 sets the audio bit depth.
■
Clock Frequency (Fs)
DIP switch 2 sets the audio clock frequency or sample rate.
n
Set all other MY16-C cards installed in the same device to the same clock frequency.
Set all CobraNet devices receiving and transmitting the same audio signals to the same
clock frequency.
BIT Audio Bit Depth
OFF 20 bit
ON 24 bit
Fs Clock Frequency
OFF 48 kHz
ON 96 kHz
1
2
3
4
5
6
7
8
O
N No. Function
1 BIT
2 Fs
3 LATENCY 1
4 LATENCY 2
5 CLOCK 1
6 CLOCK 2
7 RESERVED 1
8 RESERVED 2
8
MY16-C_E.book Page 10 Tuesday, April 13, 2004 7:32 PM