12
VXS3SB / VXS3SW / CMA3SB / CMA3SW
Owner's Manual
Installing on a wall or ceiling
4-3
Slide the speaker about 10 mm in the direction shown to tempo-
rarily secure the speaker.
About 10 mm
4-4
Use the supplied two screws to secure the speaker.
CAUTION
Make sure you tighten the screws.
NOTICE
When installing the speaker, make sure you do not touch the flaps or subject the
speaker to strong shocks. If the flaps become indented, the sound may become
distorted.
Flaps
5
Setting the line voltage/impedance and power
5-1
Set the line voltage/impedance (70V/8
Ω
) and input wattage when
using a 70V line distributed system. For details, refer to page 6.
6
Attach the grille
6-1
Align the grille to the front of the cabinet and attach the grille.
CAUTION
If the grille is not attached properly, it may fall off after the speaker is
installed.
