○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
50
■
16: Track Mix
Utility Functions
Extra Performance Memory track space can be created by using this function to mix the data from two tracks to a single
track. The data from the “source” and “destination” tracks is mixed and the result placed in the destination track. You can
also use this function to copy data from one track to another by specifying a blank destination track (i.e. the source track
data is copied to the destination track.
Z
Insert the Disk and Select a Song .........................................................................................................
Make sure that the disk containing the song with the tracks you want to mix is
loaded in the Clavinova disk drive, and that the song to be affected is selected.
X
Select the Track Mix Function ...............................................................................................................
Select the Track Mix function — see “Selecting & Using the Utility Functions”,
page 42. “NO/YES” will flash on the display. Press the TEMPO [
s
] button (YES) to
engage the Track Mix function or the [
t
] button (NO) to cancel. Once you’ve pressed
the TEMPO [
s
] button to engage the function you can release the [UTILITY] button.
⁄¤‹›‚16
TRACK
MIX
NO/YES
C
Select the Source Track .........................................................................................................................
Use the [TAP] and [METRONOME] buttons to select the source track.
⁄¤‹›‚16
TRACK
MIX
1+
1
−>
1
PRESS
[START]
V
Select the Destination Track .................................................................................................................
Use the TEMPO [
s
] and [
t
] buttons to select the destination track.
NOTES
• Up until this point you can exit from the Track Mix function without affecting the data
on disk by pressing the [UTILITY] button.
⁄¤‹›‚16
TRACK
MIX
1+
2
−>
2
PRESS
[START]
B
Start the Mix Operation ..........................................................................................................................
Press the [START/STOP] button to start the actual track mix operation. The
number of the measure being processed will appear in the lower right corner of the
display. The Track Mix function will automatically be exited when the data has been
mixed.
NOTES
• The initial data values of the destination track take priority.
• The initial data values of the source track are copied if the destination track is empty.
• The destination track cannot be returned to its pre-mix condition after the Track Mix
function has been executed. It is therefore a good idea to make a backup copy of the
data before using this function.
• Only song data created by the CVP-89, CVP-87A, CVP-85A or CVP-83S can be
mixed. Data converted by the Convert to DOC function (page 52) or Convert to SMF
function (page 53) cannot be mixed.
■
17: Volume Control
Z
Insert the Disk and Select a Song .........................................................................................................
Make sure that the disk containing the song you want to set volume levels for is
loaded in the Clavinova disk drive, that the [SONG SELECT] indicator is lit, and that
the song to be affected is selected.
This function allows you to individually adjust the playback volume of each of the Performance Memory tracks.
