○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
37
Performance Memory
The Chord Sequence Function
Z
Engage the Chord Sequence Function ................................................................................................
Press the [CHORD SEQUENCE] button. The [ORCH/3-10TR] and
[RHYTHM] track button indicators will glow red, and the ABC FINGERED
mode will be automatically selected — switch to the SINGLE FINGER mode if
you prefer. If the SINGLE FINGER mode was already selected it will remain
engaged.
NOTES
• The chord sequence data will replace any previous ABC data.
CHORD SEQUENCE
The CHORD SEQUENCE function provides a convenient way to enter chord sequences and style changes one at a time.
X
Enter the Chords and/or Style Changes ...............................................................................................
Make the required style changes (style number, normal/variation, fill-in, intro/
ending, and tempo, as necessary), play and hold a chord on the left-hand section of
the keyboard, and press the [
q
] key (look for the “
q
” symbol above the B6 key) or
the [
w
] key (C7) to enter the chord for a quarter note or whole note, respectively.
You can move one beat backward by pressing the [
?
] key (A6).
Continue entering chords in this manner until your sequence is complete.
NOTES
• The number of the measure to be entered is shown on the TEMPO display, while
the beat to be entered is shown on the BEAT display.
• If no chords are entered, the result will be a rhythm-only sequence.
C
7
q w
?
B
6
A
6
12
BEAT
Beat
Measure number
CHORD SEQUENCE
C
Stop Recording .......................................................................................................................................
When all the required chords and style changes have been entered, press the
[CHORD SEQUENCE] button to stop recording.
NOTES
• The chord sequence data now resides in Performance Memory tracks 3 though
10 and 15, and can be played back in the normal way. Add melody tracks 1 and 2
as required. You can also record over individual tracks of the sequence and
replace them with original material if you like by using the standard Performance
Memory track selection and record procedure.
●
Punch-in Chord Sequence Recording
You can begin chord sequence recording from any point within a previously-
recorded song by pausing playback at the point you want to begin chord se-
quence recording, engaging the Chord Sequence function at that point, and en-
tering the chords up to the end of the sequence as described above.
NOTES
• If you attempt punch-in chord sequence recording on a song in which no chord
sequence data has been entered, “no” will appear on the SONG NUMBER dis-
play and the recording will not be possible.
• If you record chord sequences to all songs on a disk, the maximum number of
songs available on that disk will be 55.
