Playing Styles Automatically with Your Custom Chord Progressions (Chord Looper)
CVP-809/CVP-805 Reference Manual
39
5
At the timing just before the measure you want to start loop playback, touch [On/Off] to
stop recording.
[On/Off] flashes to indicate loop playback is in standby. On the next measure of the Style, [On/Off] is turned on
and the Style will be played back in a loop in response to the recorded chord progression.
During loop playback, [On/Off] lights and the [ACMP] button flashes. At this time, chord input in the chord
section is not detected, and the whole keyboard can be used for performance.
6
Touch [On/Off] to stop loop playback of the Style, and you can play back the Style normally
by playing chords in the chord section.
Turning on [On/Off] starts loop playback again in response to the chord progressions recorded in steps 3–5.
NOTE
The latest chord progression data you recorded is maintained unless you turn the power off or select a Chord Looper
Memory number which contains data. If you want to save the data, go on to step 2 on
.
5
During loop playback