CVP-609/605 Owner’s Manual
99
CVP
-60
5 A
ssem
bl
y
CVP-605 Assembly
CAUTION
• Assemble the unit on a hard and flat floor with ample space.
• Be careful not to confuse or misplace the parts, and be sure to
install all parts in the correct orientation. Please assemble the
unit in accordance with the sequence described here.
• Assembly should be carried out by at least two persons.
• Be sure to use only the included screws of the specified sizes.
Do not use any other screws. Use of incorrect screws can cause
damage or malfunction of the product.
• Be sure to tighten all screws upon completing assembly of each
unit.
• To disassemble the unit, reverse the assembly sequence.
Remove all parts from the package and make sure you have all
of the items.
1
Attach units D and E to unit C.
1
Untie and straighten out the bundled pedal cord.
You will need the vinyl tie later in step 5.
2
Attach units D and E to unit C by tightening four long
screws (6 x 20 mm).
2
Attach unit B to the above assembly.
1
Align the screw holes on the upper side of unit B with the
bracket holes on units D and E, then attach the upper
corners of unit B to units D and E by manually tightening
two thin screws (4 x 12 mm).
2
Secure the bottom end of unit B using four tapping screws
(4 x 20 mm).
3
Securely tighten the screws on the top of unit B that were
attached in step 2-
1
.
3
Mount unit A on the above assembly.
Be sure to place your hands at least 15 cm from either end
of the main unit when positioning it.
CAUTION
• Be extra careful not to drop the unit or let your fingers be
pinched by the main unit.
• Do not hold the main unit in any position other than the position
specified here.
Have a Phillips-head (+) screwdriver of the appropriate size ready.
A
B
C
D
E
To prevent damage to the speaker box located at the bottom of unit A,
make sure to place unit A on the styrofoam pads. Also, make sure that
the pads do not touch the speaker box.
Bundled pedal cord inside here.
6 x 20 mm long screws (4)
6 x 16 mm short screws (6)
4 x 12 mm thin screws (2)
4 x 20 mm tapping screws (4)
Cord holders (2)
Headphone hanger
Power cord
4 x 10 mm
thin screws (2)
D
C
E
1
2
B
E
D
1
3
2
A
Align the
screw holes.
15 cm distance or further
Содержание Clavinova CVP-605
Страница 115: ...CVP 609 605 Owner s Manual 115 ...