CLP-970A
75
Detailed settings for the voices [VOICE SETTING]
Setting range:
DelayLCR
Delay applied at left, center, and right
positions.
DelayLR
Delay applied at left and right posi-
tions.
Echo
Echo-like delay
CrossDelay
Left and right delays are crossed.
Symphonic
Adds a rich and deep acoustic effect.
RotarySpeaker
Adds the vibrato effect of a rotary
speaker.
Tremolo
The volume level changes in rapid
cycles.
VibeRotor
The vibrato effect of a vibraphone.
AutoPan
The sound pans left to right and back
and forth.
Phaser
The phase changes periodically,
swelling the sound.
AutoWah
The center frequency of the wah filter
changes periodically.
SoundBoardRev Simulates the reverberation of a
piano soundboard.
Off
No effect.
See the procedure on page 66.
In Dual mode:
Setting range:
0 - 127
This parameter enables determines the manner and
degree to which the volume level changes in response
to your touch on the keyboard (how hard you play).
Since the volume level of the harpsichords and pipe
organs do not change regardless of how you play the
keyboard, the normal setting for these voices is 127.
(See the setting range below.)
See the procedure on page 66.
In Dual mode:
Setting range:
0 (softest) - 64 (largest changes in the level) - 127
(loudest and fixed)
See the procedure on page 66.
Setting range:
SustainCont
Damper function that sustains the
sound longer as you press the pedal
deeper.
Sustain
On/Off switch type damper function.
PitchBend
Changes the pitch continuously.
Off
No function.
Normal setting:
SustainCount
Setting the variation effect depth
[VariationSend]*
A
B
C
D
NO
YES
A
B
C
D
NO
YES
Voice for editing (Voice 1 or Voice 2)
Setting the touch sensitivity
[TouchSense]*
Setting the right pedal function
[RPedal]
A
B
C
D
NO
YES
A
B
C
D
NO
YES
Voice for editing (Voice 1 or Voice 2)
A
B
C
D
NO
YES
Содержание Clavinova CLP-970A
Страница 19: ...19 CLP 970A Basic Operation CLP 970A 19 ...
Страница 63: ...CLP 970A 63 Detailed Settings CLP 970A 63 ...
Страница 91: ...CLP 970A 91 Appendix CLP 970A 91 ...