15
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC
[260A] x 7
[260B] x 10
AEXL88L
Circuit Board
AEXL88H
Circuit Board
GH keyboard
Assembly
Thin metal plate etc.
Triangle mark
[B]
[C]
[D]
TX000670
White key
Key spring
Rod
Key spring
Hook
Stopper L88
Hammer, White key
(Fig. 28)
(Fig. 29)
(Fig. 30)
(Fig. 31)
(Fig. 27)
18
Disassembling the GH Keyboard
*
After inserting a round stick (Rod: TX000670) between
the frame and keys, remove the circuit boards.
(See Fig. 29)
18-A AEXL88-L circuit board.
Remove the seven [7] screws marked [260A]. The
AEXL88-L circuit board can then be removed.
(See Fig. 27)
18-B AEXL88-L circuit board.
Remove the ten [10] screws marked [260A]. The
AEXL88-H circuit board can then be removed.
(See Fig. 27)
*
Keys can be removed without removing the circuit
boards.
18-C White Key
Insert a thin plate between the white keys, near the
triangle mark around the fulcrum of the key, and press
down the stopper marked [A] to remove the key.
(See Fig. 28 and 29)
*
Take care not to damage the key spring when
removing a key.
*
A black key can be removed after both adjacent
white keys have been removed.
18-D Hammer, White Key
After a key has been removed, push the key spring down
ones to take it out of the hook. (See Fig. 30) Place the
GH keyboard assembly upside down and peel away
then stopper L88. The hammer of the white key can
then be removed. (See Fig. 31)
*
The hammer of a black key can be removed in the
same manner.
[260]: Bind Head Tapping Screw-P 3.0X10 MFZN2 (VT413400)