Yamaha Clavinova CLP-120, Руководство по обслуживанию

Страница: 18 / 76

18
CLP-120
[E]
[F]
White Key
Key Guide
Key Spring
(Fig.28)
25. Assembling the GHD Keyboard
25-1 Hammer of White (Black) Key
Place the keyboard assembly upside down, insert a
hammer assembly into the frame, and put the
stopper L88W on. (Fig.26)
* There are four kinds of hammers that differ in
weight.
25-2 Key Spring
Place the keyboard assembly right side up, and fix
a key spring to the frame by setting it at the slit
and pushing it down once. (Fig.27)
* Be careful of the direction of the spring.
25-3 White (Black) Key
After a key has been fit to part [F] and the key
guide, make sure that the spring is fixed to the key.
Then press part [E] of the key down. (Fig.28)
25-4 GH-D_SW L circuit board.
Tighten the seven [7] screws marked [260a] to fix
the GH-D_SW L circuit board. (Fig.21)
25-5 GH-D_SW H circuit board.
Tighten the ten [10] screws marked [260b] to fix
the GH-D_SW H circuit board. Set the slits of the
rubber contact at the marks on the frame. (Fig.21)
Hammer, White Key
Slit
Flame
Stopper L88W
Frame
Hook
Spring
Upside
(Fig.26)
(Fig.27)