Yamaha Clavinova CLP-120, Руководство по обслуживанию

Страница: 13 / 76

13
CLP-120
14. Music Rest Assembly
(Time required: about 1 min)
14-1. Remove the four (4) screws marked [39]. The
music rest assembly can then be removed. (Fig.11)
Top Board Assembly Music Rest Assembly
Top View
[39]
[39]: Bind Head Tapping Screw-1 3.0X16 MFZN2BL (EP030310)
(Fig.11)
R
L
[S1]
[S3]
15. Back Board (Time required: about 2 min)
15-1. Remove the four (4) screws marked [S1] and the
two (2) screws marked [S3].
The back board can then be removed. (Fig.12)
(Fig.12)
[S1]: Truss Head Tapping Screw-1 4.0X20 MFZNBL
(03747290)
[S3]: Truss Head Screw 4.0X12 MFZNBL (VP367300)
16. Stand Base L, R
(Time required: about 3 min for each)
* For safety, make sure to perform by two persons.
16-1. Spread soft cloth on the floor and lay down the unit
carefully on its back. (Fig.13)
16-2. Put the bolsters under both side boards to float the
stand bases from the floor. (Fig.14)
16-3. Remove the three (3) screws marked [7] for each
side. The stand base L, R can then be removed.
(Fig.14)
Cloth
Pedal Assembly
[7]
Cloth
Stand Base Assembly
(Fig.13)
(Fig.14)
[7]: Bind Head Tapping Screw-1 4.0X40 MFZN2Y (V5344700)