background image

8

DIRECT PLAY

Select a desired track using the numeric button.

Example: To select track 25
Press 

1

twice, then immediately press 

2

once.

If a track number higher than the highest track number on
the disc is selected, the last track on the disc will be
played.

Caution
When the disc tray is open, do not touch the inside gear
wheel
. If you touch the gear wheel, your finger may be
caught in the closing tray and injured.

SKIP PLAY

To play from the beginning of the track following the one now
playing

To play from the beginning of the track now playing

To play from the beginning of the track before the one now
playing

(twice)

These operations can also be performed when the unit is in
the pause or stop mode.

When using the SKIP button on the remote control
transmitter:

If the button is pressed and held, the track number is 
continuously changed to higher numbers (or lower 
numbers).

When using the SKIP/SEARCH buttons on the front panel:

Be careful not to press and hold a button, otherwise the 
selected track is played forward (or backward) rapidly.

To resume play, press the PAUSE button again (or press the
PLAY button).
* The PLAY/PAUSE button on the front panel can also be

used to stop play temporarily or to resume play.

To stop play temporarily

To stop play completely

To play a desired track on the disc

PAUSE

STOP

5

SKIP

+

I0

5

SKIP

SKIP

The selected track
number is displayed

STANDBY/ON

NATURAL SOUND COMPACT DISC PLAYER 

Gear wheel

Содержание CDX-9






















Отзывы: