background image

2

SAFETY INSTRUCTIONS

• Explanation of Graphical Symbols

The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.

WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.

1

Read Instructions – All the safety and operating
instructions should be read before the unit is operated.

2

Retain Instructions – The safety and operating instructions
should be retained for future reference.

3

Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.

4

Follow Instructions – All operating and other instructions
should be followed.

5

Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.

6

Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.

6A

A unit and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
unit and cart combination to overturn.

7

Wall or Ceiling Mounting – The unit should
be mounted to a wall or ceiling only as
recommended by the manufacturer.

8

Ventilation – The unit should be situated so that its location
or position does not interfere with its proper ventilation.
For example, the unit should not be situated on a bed,
sofa, rug, or similar surface, that may block the ventilation
openings; or placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow of air
through the ventilation openings.

9

Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances that
produce heat.

10

Power Sources – The unit should be connected to a power
supply only of the type described in the operating
instructions or as marked on the unit.

11

Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.

12

Cleaning – The unit should be cleaned only as
recommended by the manufacturer.

13

Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.

14

Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into the
inside of the unit.

15

Damage Requiring Service – The unit should be serviced
by qualified service personnel when:

A.

The power-supply cord or the plug has been damaged;
or

B.

Objects have fallen, or liquid has been spilled into the
unit; or

C.

The unit has been exposed to rain; or

D.

The unit does not appear to operate normally or
exhibits a marked change in performance; or

E.

The unit has been dropped, or the cabinet damaged.

16

Servicing – The user should not attempt to service the unit
beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.

17

Power Lines – An outdoor antenna should be located away
from power lines.

18

Grounding or Polarization – Precautions should be taken
so that the grounding or polarization is not defeated.

We Want You Listening For A Lifetime

(for US customers only)

YAMAHA and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing. Since hearing damage from loud
sounds is often undetectable until it is too late,
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group recommend you to
avoid prolonged exposure from excessive volume
levels.

IMPORTANT!
Please record the serial number of this unit in the space
below.

Model:
Serial No.:

The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

  CAUTION:  TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

  COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

Содержание CDX-393
























Отзывы: