CDR-D651
Front panel
Remote controller
CODE
PCB Test Mode (service)
TIME
9E
FL display test
DIMMER
9C
Dimmer test
MENU
BA
Not used for service
-
BC
Not used for service
+
BB
Not used for service
EDIT
B0
Not used for service
DELETE
B1
Not used for service
SET
B2
Not used for service
1
91
Not used for service
2
92
Automatic adjustment (1) (at CD-RW playback)
3
93
Automatic adjustment (2) (at CD-RW playback)
4
94
Automatic adjustment (3) (at CD-RW playback)
5
95
1 track kick - continued
6
96
1 track kick + continued
7
97
30 track kick - continued
8
98
30 track kick + continued
9
99
150 track kick - continued
0
90
150 track kick + continued
+10
9A
PROG
8B
(A) Spindle acceleration
REPEAT
8D
MUTE OFF
RANDOM
8E
MUTE ON
CLEAR
8C
(A) Spindle deceleration
PAUSE
83
TRACKING OFF
SEARCH -
88
10 track kick - continued
89
10 track kick + continued
JOG (push)
Test mode switch mode finalized
JOG (+/-)
Test mode selected
8
*1 Switching Servo Gain
In order to use a CD-RW disk in the test mode, press the
REC MODE button in the PCB inspection mode so as to
raise the servo gain.
Also, it is possible to play back the disk by selecting “Auto
Adjustment (1)” to “Auto Adjustment (3)” (pressing 2 to 4
keys of the remote controller).
When the power is turned off, the original state is
resumed.
*2 Version Check
With the “Version Check” selected, it is possible to check
the version of the microprocessor and CDR unit.
In the test mode, every time TRACK NO. button on the
front panel is pressed, the display changes to the
microprocessor, firmware in the CDR unit and checksum
of the microprocessor in that order.
