Yamaha CD-S3000, Руководство пользователя

Страница: 20 / 242

20
En
Connections
■
Connecting to the BALANCED OUT
jacks
Connect your amplifier with the XLR balanced input
jacks. The pin assignments for these jacks are shown
below. Refer to the owner’s manual supplied with your
amplifier and verify that its XLR balanced input jacks are
compatible with the pin assignments.
When connecting, be sure to match the pins and insert the
connector of the “female” XLR balanced cable. When
disconnecting, pull out the “female” XLR balanced cable
while pressing down the latch lock on the plug.
■
Connecting the power cable
Plug the power cable into the AC IN inlet when all
connections are complete, and then plug in the power
cable to the AC outlet.
1: ground 2: hot
3: cold
“Female” XLR connector
“Male” XLR connector
Latch lock
TE
OUT
DIGITAL IN
COAXIAL
DIGIT
OPTICAL OPTICAL U S B
AC IN
Supplied power cable
to an AC outlet
Rear panel of CD-S3000