SYSTEM OPERATIONS
13
En
Engl
ish
BASIC
OPERATIONS
■
To use the ECO mode of the CD player
This mode reduces the power consumption during the
standby mode. Even if the USB device is connected to the
USB port of the CD player, the USB device cannot be
charged when the CD player is in standby mode and ECO
mode is ON.
Press ON/STANDBY, OFF while pressing and
holding
of the CD player to turn on the CD
player.
Each time you turn on the CD player by press
ON/STANDBY, OFF while pressing and holding
of
the CD player, ECO ON or ECO OFF appears on the front
panel display alternately.
Follow the procedure below to change the brightness of
the receiver’s and CD player’s front panel display.
Press DIMMER.
You can choose your desired brightness of the front panel
display between normal (bright), mid dim, and dim.
The sleep timer sets the system to the standby mode after
the specified time elapses.
Press SLEEP repeatedly to select the desired
duration.
Each time you press the key, the duration changes as
follows.
The SLEEP indicator lights up in the front panel display.
y
• The sleep timer is canceled if you set the receiver to the standby
mode.
• If you press SLEEP while the sleep timer is set, the remaining
time appears in the front panel display.
To cancel the sleep timer
Press SLEEP repeatedly to select “OFF”.
You can connect your headphones to the PHONES jack
on the front panel of the receiver.
The sound from the speakers and the subwoofer stops.
Changing the brightness of the
front panel display
Setting the sleep timer
VOL
TONE BALANCE
DISPLAY
DIMMER
SLEEP
MUTE
PURE DIRECT
DIMMER
VOL
TONE BALANCE
DISPLAY
DIMMER
SLEEP
MUTE
PURE DIRECT
SLEEP
To use headphones
120min.
90min.
60min.
30min.
OFF
ON/STANDBY
OFF
PHONES
