manualshive.com logo in svg

Yamaha BLASTER YFS200W, Руководство пользователя

Поделиться
Скачать
Yamaha BLASTER YFS200W Скачать руководство пользователя страница 73

 

7-20

 

1

2

3

4

5

6

7

8

9

10

11

 

RIDING OVER ROUGH TERRAIN

 

Riding over rough terrain should be done with cau-
tion. Look out for obstacles which could cause
damage to the ATV or could lead to an upset or ac-
cident. Be sure to keep your feet firmly mounted on
the footboards at all times. Avoid jumping the ATV
as loss of control and damage to the ATV may re-
sult.

WARNING

 

EWB01650 

 

Before operating in a new area, check for ob-
stacles. Never attempt to ride over large obsta-
cles, such as large rocks or fallen trees. When

you go over obstacles, always follow proper
procedures as described in the Owner’s Manu-

 

al.

SLIDING AND SKIDDING

 

Care should be used when riding on loose or slip-
pery surfaces since the ATV may slide. If unex-
pected and uncorrected, sliding could lead to an
accident.
To reduce the tendency for the front wheels to slide
in loose or slippery conditions, positioning your
weight over the front wheels will sometimes help.

If the rear wheels of your ATV start to slide side-
ways, control can usually be regained (if there is
room to do so) by steering in the direction of the

 

1. Air filter case check hose

1

Содержание BLASTER YFS200W





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды