manualshive.com logo in svg

Yamaha BLASTER YFS200W, Руководство пользователя

Поделиться
Скачать
Yamaha BLASTER YFS200W Скачать руководство пользователя страница 42

 

5-5

 

1

2

3

4

5

6

7

8

9

10

11

 

a Yamaha dealer adjust it.

 

●

 

Check the operation of the lever and pedal. They
should move smoothly and there should be a
firm feeling when the brakes are applied. If not,
have a Yamaha dealer check the brake system.

 

Brake fluid level

 

Check the brake fluid level. Add fluid if necessary.
(See page 8-24.)

 

Brake fluid leakage

 

Check to see if any brake fluid is leaking out of the
pipe joints or brake fluid reservoirs. Apply the
brakes firmly for one minute. If there is any leak-
age, have a Yamaha dealer check the brake sys-
tem.

 

Brake operation

 

Test the brakes at slow speed after starting out to
make sure they are working properly. If the brakes
do not provide proper braking performance, check
the brake pads for wear. (See page 8-23.)

WARNING

 

EWB00580 

 

Always check the brakes at the start of every
ride. Do not ride the ATV if you find any prob-
lem with the brakes or you could lose braking
ability, which could lead to an accident. If a
problem cannot be corrected by the adjust-
ment procedures provided in this manual, have

 

a Yamaha dealer check for the cause.

 

EBU19761

 

Throttle lever 

 

Check the operation of the throttle lever. It must
open smoothly and spring back to the idle position
when released. Have a Yamaha dealer correct if
necessary.

 

EBU19770

 

Drive chain 

 

Check the condition of the drive chain and check
the drive chain slack. Lubricate and adjust the
drive chain as necessary. (See page 8-30.)

Recommended brake fluid:

DOT 4

Содержание BLASTER YFS200W





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды