manualshive.com logo in svg

Yamaha BIG BEAR YFM400FWS, Руководство пользователя, Страница: 27 / 173

Поделиться
Скачать
Yamaha BIG BEAR YFM400FWS Скачать руководство пользователя страница 27

4-4

EBU00051

Speedometer

The speedometer shows riding speed. This
speedometer is equipped with an odometer
and trip odometer. The trip odometer can be
reset to “0” with the reset knob. Use the trip
odometer to estimate how far you can ride on
a tank of fuel before going to reserve. This in-
formation will enable you to plan fuel stops in
the future.

1. Reset knob
2. Speedometer
3. Odometer
4. Trip odometer

EBU00052

Fuel gauge

The fuel gauge indicates the amount of fuel in
the fuel tank. When the needle reaches the
red line, refill the tank at the first opportunity.

1. Fuel gauge

2. Red line

NOTE:

If the machine runs out of fuel, move the fuel
cock lever to the “RES” position. Approxi-
mately 4.0 L (0.9 Imp gal, 1.1 US gal) of fuel
will be remaining in the tank.

U5FU14.book  Page 4  Thursday, April 3, 2003  1:19 PM

Содержание BIG BEAR YFM400FWS














































































































































































Отзывы:

Нет отзывов