manualshive.com logo in svg

Yamaha BIG BEAR YFM400FWS, Руководство пользователя, Страница: 25 / 173

Поделиться
Скачать
Yamaha BIG BEAR YFM400FWS Скачать руководство пользователя страница 25

4-2

1

2

3

4

5

6

7

8

9

10

11

12

13

14

EBU00802

Indicator and warning lights

1. Reverse indicator light “REVERSE”
2. Neutral indicator light “NEUTRAL”
3. Oil temperature warning light “

”

4. Four-wheel drive indicator light “

”

EBU00044

Reverse indicator light “REVERSE”

This indicator light comes on when the trans-
mission is in reverse.

EBU00045

Neutral indicator light “NEUTRAL”

This indicator light comes on when the trans-
mission is in neutral.

EBU01140

Oil temperature warning light “

” 

When the oil temperature reaches a specified
level, this light comes on to warn that the en-
gine oil temperature is too hot. If the light
comes on during operation, stop the engine
as soon as it is safe to do so and allow the en-
gine to cool down for about 10 minutes.

CAUTION:

_ 

●

The engine may overheat if the ATV is
overloaded. If this happens, reduce
the load to specification. 

●

Restart after making sure that the light
is out. Continuous use while the light
is on may cause damage to the en-
gine. 

_

EBU00605

Four-wheel-drive indicator light “ ”

This indicator light comes on when the 2WD/
4WD switch is in the 4WD position.

NOTE:

Due to the synchronizing mechanism in the
differential gear case, the light may not come
on until the ATV starts moving. 

U5FU14.book  Page 2  Thursday, April 3, 2003  1:19 PM

Содержание BIG BEAR YFM400FWS














































































































































































Отзывы:

Нет отзывов