Yamaha BBT 500H, Руководство пользователя

Страница: 17 / 21

17
Attaching the Rack Mount Adaptor
Attach the supplied rack mount adaptor lets you install the BBT500H in a stan-
dard 19-inch rack.
1. Remove the two screws
A
on the side of the device and remove the
carrying handle set.
2. Remove the two screws
B
on the side of the device.
3. Attach the supplied rack mount adaptor to the device using the three
supplied screws
C
.
* Never use any screws other than the supplied screws
C
. Using any other screws
can result in damage.
4. In the same manner, attach the other supplied rack mount adaptor to
the opposite side of the device.
5. Keep the leftover screws (
A
,
B
) in a safe place for future use.
* Make sure you don’t over-tighten the screws when reattaching the carrying handle
to the device. Doing so can result in damage to the carrying handle.
Air Flow
The device utilizes a forced air cooling system, which cools the interior of the unit by drawing air through the front intake by the fan, which
push the air out the back.
Intake Exhaust
Cooling fan
Front panel
Side view Rear view
Carrying Handle Set
Rack Mount Adaptor
(supplied)
A
B
C
Cable
Clamp Filter
Clamp Filter
●
Attaching the Clamp Filter
(For U.S. and Canadian models only)
To protect against electromagnetic waves, attach the supplied Clamp Filters to the cable connecting the bass guitar
to the amplifier’s INPUT jack, and the cables connecting the amplifier’s SPEAKER 1, 2 jacks to the speakers.
* When attaching the clamp filter, wrap the cable once around the clamp filter as close to the BBT500H unit as possible.