CONFIGURATIONS
➤
Configuring various functions (Setup menu)
En
93
Setup menu items
Menu
Item
Function
Page
Speaker
Auto Setup
Automatically optimizes the speaker settings (YPAO).
Manual Setup
Power Amp Assign
Selects a speaker system.
Configuration
Front
Selects the size of the front speakers.
Center
Selects whether or not a center speaker is connected and its size.
Surround
Selects whether or not surround speakers are connected and their size.
Surround Back
Selects whether or not surround back speakers are connected and their size.
Front Presence
Selects whether or not presence speakers are connected.
Subwoofer
Selects whether or not a subwoofer is connected and its phase.
Layout
Selects a surround speaker layout when surround speakers are used.
Bass Cross Over
Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”.
Distance
Sets the distance between each speaker and listening position.
Level
Adjusts the volume of each speaker.
Parametric EQ
Adjusts the tone with an equalizer.
Test Tone
Enables/disables the test tone output.
Sound
Lipsync
Delay Enable
Enables/disables the Lipsync adjustment for each input source.
Auto/Manual Select
Selects the method to adjust the delay between video and audio output.
Adjustment
Adjusts the delay between video and audio output manually.
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Max Volume
Sets the maximum volume to prevent excessive loudness.
Initial Volume
Sets the initial volume for when this receiver is turned on.
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted.
CINEMA DSP 3D Mode
Enables/disables CINEMA DSP 3D.
Extended Surround
Selects how to play back 5.1- to 7.1-channel sources when surround back speakers are used.
Video
Video Mode
Enables/disables the video signal processing (resolution and aspect ratio).
HDMI
HDMI Control
Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input).
Audio Output
Selects a device to output audio.
Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.