Yamaha Aventage RX-A1080, Быстрый старт, Страница: 14 / 136

14
En
6
Connecting the power cable to an AC wall outlet,
and turning on the unit
1
Plug the power cable into an
AC wall outlet.
2
Press
z
(receiver power) to
turn on the unit.
3
Turn on the TV and switch the
TV input to display video from
the unit (HDMI OUT jack).
The Network Setup screen shown below will be
displayed on the TV when the unit is turned on for
the first time after purchase. It may take several
tens of seconds for the screen to be displayed
(WAC: Wireless Accessory Configuration).
See “Sharing the iOS device setting” under
“Connecting to a network wirelessly” in the
Owner’s Manual when using this function to
connect the unit to a network.
This document explains wireless connection
using the MusicCast CONTROLLER app
installed on your mobile device. Follow the
procedure described under “
8
Setting MusicCast”
(p. 17).
Note
This screen will not be displayed if the unit is connected
to a router via its NETWORK jack (wired connection).
Warning
Before connecting the power cable
(Taiwan, Brazil, and Central and South
America models only)
Set the switch position of VOLTAGE
SELECTOR according to your local voltage.
Voltages are AC 110–120/220–240 V,
50/60 Hz.
AC IN
VOLTAGE SELECTOR
220V-
240V
110V-
120V
VOLTAGE SELECTOR
To an AC wall
outlet
INPUT
PURE DIRECT
SCENE
4 3 2 1
8 7 6 5
HDMI OUT PARTY
SLEEP
MAIN ZONE 2
INPUT
PURE DIRECT
SCENE
4 3 2 1
8 7 6 5
HDMI OUT PARTY
SLEEP
MAIN ZONE 2
INPUT
PURE DIRECT
SCENE
4 3 2 1
8 7 6 5
HDMI OUT PARTY
SLEEP
MAIN ZONE 2 Z NE 2
INPUT
PPU PURRE D E DIR IR C EC ECTT
SCENE
4 3 2 1
8 7 6 5
HD HDM MI IOOUUTT PPPPPAAAAA PPPPP RRRRRTTTTTYYYYY TTTTTTTTTTTTTTTT
SLEEP
MA MA MAIIINNN O ZO ZO ZO ZONE NE NE 22222
z