YDP-S51 MIDI Reference
3
MIDI Functions
The information related to Voice changes is called “program change” in MIDI. Sending and receiving program change
messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive
parameters are set to ON, Voice change information in this instrument can be transmitted to or received from a computer.
(However, the Voice as played from the keyboard is maintained and does not change.)
For information on program
change numbers for each of
the Voices of the instrument,
refer to page 4.
Default setting
ON
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C
6 key. Pressing
the C
6 key repeatedly toggles between Local Control On and Off.
Information related to non-note expressive changes, such as the use of a sustain pedal, is called “control change” in
MIDI. Sending and receiving control change messages can be enabled or disabled as desired on this instrument. For
example, if the relevant transmit and receive parameters are set to ON, pedal performance information on this instrument
can be transmitted to or received from a computer. (However, the performance of pedals and other controls as played
from the instrument is maintained and does not change.)
For information on control
changes that can be used with
the instrument, refer to page 4.
Default setting
ON
While holding down [DEMO/SONG] and [PIANO/VOICE], press the D6 key. Pressing the
D6 key repeatedly toggles between Local Control On and Off.
Program Change ON/OFF
C
6
Control Change ON/OFF
D6
ydps51_en_mr.book 3 ページ ２０１２年８月３１日 金曜日 午後２時１４分
